• Packing
  • Inspecting
  • Assembling
  • Testing
  • Painting


  • Slats – 5 3/4" x 10 gauge formed slat standard, bolted to A-2 attachments on chain. Slat length is effective conveying surface.
    Conveyor frame – Heavy duty, powder painted 7 gauge, bolted construction.
    Chain & Slat return – Returns on angle track, supplied as part of conveyor framework.
    Chain – Heavy duty 6" pitch with A-2 attachments on each pitch.
    Driving sprockets - 6 Tooth SR 196 12" pitch diameter.
    Floor supports – Supplied as part of conveyor framework, not adjustable. Specify height. 24" minimum elevation.
    Drive shaft – 2 15/16" diameter CRS.
    Tail shaft – 2 7/16" diameter CRS.
    Take-up – Mounted on tail end of conveyor for adjustment of chain tension.
    Drive – Floor mounted at discharge end of conveyor.
    Reducer – Heavy duty worm gear reducer.
    Capacity – Not to exceed Load capacity.
    Unit of Measure

    Motor

    N/A 2 hp 230/460-3-60 TE motor, C-face

    Speed Constant

    N/A 30 fpm

    Capacity per Foot Max.

    N/A 400 lb