• Oily conditions
  • Pallets
  • Drums
  • Positive drive


Bed – 2 1/2" diameter x 11 gauge steel tread rollers, 11/16" hex shaft. Tread rollers mounted in 4" and 6" x 4 gauge powder painted formed steel channel frame. Sections are bolted together with butt couplings and floor supports.
Drive chain – No. 50 circular roller chain.
Floor supports – Heavy duty supports are adjustable 30 1/4" to 40" from floor to top of roller. One support at each end of conveyor and one center leg with knee brace.
Center drive – Mounted underneath conveyor.
Bearings – Sealed, prelubricated ball bearings.
Chain guard – Lower chain guard is mounted on bottom of roller frame, and upper chain guard is mounted above roller frame to totally enclose drive chain.
Speed reducer – Heavy duty worm gear C-face mounted.

Available Options
- Side Mounted Drive: Motor/Reducer unit can be mounted to side of conveyor frame for lower elevations. Drive is higher than conveyor frame.
- Conveyor Speed: 30 feet per minute is standard. Other constant, and variable, speeds are available.
- Rollers Set Low: Rollers can be set low in conveyor frame to provide a guard rail effect.
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Conveying Surface Width

Width between Rail

Overall Bed Width

Outside Radius R

Inside Radius IR

Number of Rollers

Chain Driven Live Roller Curve 28" N/A 28 in N/A 31 in N/A 34 in N/A 99 º N/A 68 º N/A 28
Chain Driven Live Roller Curve 34" N/A 34 in N/A 37 in N/A 40 in N/A 99 º N/A 62 º N/A 28
Chain Driven Live Roller Curve 40" N/A 40 in N/A 43 in N/A 46 in N/A 99 º N/A 56 º N/A 28
Chain Driven Live Roller Curve 46" N/A 46 in N/A 49 in N/A 52 in N/A 99 º N/A 50 º N/A 21
Chain Driven Live Roller Curve 52" N/A 52 in N/A 55 in N/A 58 in N/A 99 º N/A 44 º N/A 21
Chain Driven Live Roller Curve 58" N/A 58 in N/A 61 in N/A 64 in N/A 99 º N/A 38 º N/A 19
Chain Driven Live Roller Curve 64" N/A 64 in N/A 67 in N/A 70 in N/A 99 º N/A 32 º N/A 19
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1