• Adjustable floor supports
  • Inclie to 15 degrees
  • Guard rails

Bed – 5 1/2" deep x 14 gauge powder painted formed steel channel frame. Bed sections are 10 feet and 5 feet long, bolted together with splice plates and floor supports.
Belt – FS top side, brushed bottom side, with clipper lacing.
Guard rail – 6" high x 16 gauge formed, powder painted steel on both sides, full length of bed sections.
Underside guards – Formed 16 gauge pans full length of bed sections, removable, secured with TEK screws.
Tail pulley – 4" or 6" diameter (see chart) crowned with 1 3/16" diameter shaft.
Drive pulley – 4", 6" and 8" diameter crowned and fully lagged. 4" and 6" diameter pulleys have 1 3/16" diameter shaft, 8" diameter pulley has 1 7/16" diameter shaft.
Snub-roller – 2" diameter for 4" and 6"diameter pulleys, 2 1/2" diameter for 8" diameter pulley.
Return rollers – 1.9" diameter placed on 10' centers.
Floor supports – Adjustable 30" to 44" from floor to top of belt. One floor support provided at each end of conveyor and at each bed joint.
Take-up – 6" long screws located at tail pulley to provide belt tension.
Bearings – Sealed, prelubricated with cast iron housings.
Speed reducer – C-face mounted heavy duty worm gear reducer.
Capacity – 10 pounds per foot maximum live load. See load Capacity.

1 - 7 of 7 | Results Per Page | View | Unit of Measure
1 

Item #

Diameter Drive Pulley

Diameter Tail Pulley

Belt Width

Bed Width

Weight 10' 10" OAL

Weight per Foot

SBT 12" N/A 4 in N/A 4 in N/A 12 in N/A 14 in N/A 723 lb N/A 25 lb
SBT 18" N/A 4 in N/A 4 in N/A 18 in N/A 20 in N/A 858 lb N/A 28 lb
SBT 24" N/A 4 in N/A 4 in N/A 24 in N/A 26 in N/A 993 lb N/A 32 lb
SBT 30" N/A 6 in N/A 6 in N/A 30 in N/A 32 in N/A 1125 lb N/A 37 lb
SBT 36" N/A 6 in N/A 6 in N/A 36 in N/A 38 in N/A 1260 lb N/A 42 lb
SBT 42" N/A 8 in N/A 6 in N/A 42 in N/A 44 in N/A 1510 lb N/A 47 lb
SBT 48" N/A 8 in N/A 6 in N/A 48 in N/A 50 in N/A 1650 lb N/A 51 lb
1 - 7 of 7 | Results Per Page | View | Unit of Measure
1