Bed – Roller bed with 2 1/2" diameter tapered to 1 11/16" diameter x 14 gauge galvanized and 1.9" diameter x 16 gauge galvanized tread rollers. Mounted in 7" x 12 gauge powder painted formed steel channel frame.
Floor supports – Adjustable 31 1/2" to 45 1/2" from floor to top of rollers. One support at ends of 190LSC (Curve), 190LSCS (Curve Spur) and 190LSS (Straight Spur). Single leg supplied for center of outside rail on 90° 190LSC only.
Slave driven – Curves or spurs are slave driven from drive shaft of Model 190LS conveyor. Shafts are coupled by chain coupling at bed joints.
Drive Shaft – 1" diameter steel shaft extends full length of conveyor, coupled with universal joints ("U" joints) at necessary intervals.
Drive spools – 2" diameter Delrin spool held in place on drive shaft with "snap-on" lock collars.
Drive guard – Underside of drive shaft with spools and drive belts guarded full length of conveyor.
Drive belts – 3/16" diameter urethane belt from drive spool to tread roller.
Bearings – Tread rollers, pre-lubricated ball bearings. Sealed, prelubricated, self-aligning ball bearings on drive shaft.
Butt couplings – Standard for connecting to 190LS.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

Width bethween Rail

Overall Frame Width

Radius at 90º

190LSC-18" N/A 15 in N/A 18 in N/A 32 1/2 in
190LSC-24" N/A 21 in N/A 24 in N/A 32 1/2 in
190LSC-30" N/A 27 in N/A 30 in N/A 32 1/2 in
190LSC-36" N/A 33 in N/A 36 in N/A 48 in
190LSC-42" N/A 39 in N/A 42 in N/A 48 in
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1