• Transports around turns with positive alignment of package
  • Can be slave driven from Flat Belt Driven Live Roller Conveyor
Driving belt – "B" section V-belt.
Bed – 2 1/2" diameter tapered to 1 11/16" diameter x 14 gauge wall plated tread rollers. 7/16" hex shafts. Steel pressure sheaves. Mounted in 7" x 1 1/2" x 12 gauge powder painted formed steel channel frame.
Floor supports – Adjustable 31 1/2" to 45 1/2" from floor to top of rollers. One support at each end, and center leg on outer rail.
Take-up – Screw take-up provided to insure proper V-belt tension. Mounted underneath conveyor.
Tangent – 12" long, one on each end.
End Drive – Mounted below bed section.
Bearings – Sealed prelubricated with cast iron housings.
Speed reducer – C-face mounted heavy duty worm gear reducer.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 

Item #

Width bethween Frames

Motor

Belt Speed Constant

Capacity

190CLR-15" N/A 15 in N/A 1/2 hp 230/460-3-60 TE motor N/A 60 fpm N/A 540 lb
190CLR-21" N/A 21 in N/A 1/2 hp 230/460-3-60 TE motor N/A 60 fpm N/A 540 lb
190CLR-27" N/A 27 in N/A 1/2 hp 230/460-3-60 TE motor N/A 60 fpm N/A 540 lb
190CLR-33" N/A 33 in N/A 1/2 hp 230/460-3-60 TE motor N/A 60 fpm N/A 540 lb
190CLR-39" N/A 39 in N/A 1/2 hp 230/460-3-60 TE motor N/A 60 fpm N/A 540 lb
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1