• Drag Chain Conveyor

    • Handles pallets the hard way
    • Quiet operation
    • Low profile - 12" elevation optional
    • Available with zero pressure accumulation feature

    Frame – 9" x 7 gauge powder painted formed steel channel frames. Sections are bolted together with splice plates and floor supports.
    Chain – (2) 60F single pitch conveyor chains, straight side bar, on 36" centers.
    Chain guide – UHMW.
    Floor supports – 24" to top of chain. One support supplied at each end of conveyor and at each bed joint.
    Motor – Motor and speed reducer are located underneath conveyor frame.
    Speed reducer – Heavy duty worm gear for C-face mounted motor.
    Sprockets – Hardened sprockets with 1 15/16" diameter CRS drive shaft.
    Bearings – Sealed, pre-lubricated with cast iron housing.
    Capacity – Maximum motor size is 3 HP. Not to exceed Load capacity.

  • Slat Conveyor

    • Packing
    • Inspecting
    • Assembling
    • Testing
    • Painting

    Slats – 5 3/4" x 10 gauge formed slat standard, bolted to A-2 attachments on chain. Slat length is effective conveying surface.
    Conveyor frame – Heavy duty, powder painted 7 gauge, bolted construction.
    Chain & Slat return – Returns on angle track, supplied as part of conveyor framework.
    Chain – Heavy duty 6" pitch with A-2 attachments on each pitch.
    Driving sprockets - 6 Tooth SR 196 12" pitch diameter.
    Floor supports – Supplied as part of conveyor framework, not adjustable. Specify height. 24" minimum elevation.
    Drive shaft – 2 15/16" diameter CRS.
    Tail shaft – 2 7/16" diameter CRS.
    Take-up – Mounted on tail end of conveyor for adjustment of chain tension.
    Drive – Floor mounted at discharge end of conveyor.
    Reducer – Heavy duty worm gear reducer.
    Capacity – Not to exceed Load capacity.