• Oily conditions
  • Pallets
  • Drums
  • Positive drive


  • Bed – 2 1/2" diameter x 11 gauge steel tread rollers, 11/16" hex shaft. Tread rollers mounted in 4" and 6" x 4 gauge powder painted formed steel channel frame. Sections are bolted together with butt couplings and floor supports.
    Drive chain – No. 50 circular roller chain.
    Floor supports – Heavy duty supports are adjustable 30 1/4" to 40" from floor to top of roller. One support at each end of conveyor and one center leg with knee brace.
    Center drive – Mounted underneath conveyor.
    Bearings – Sealed, prelubricated ball bearings.
    Chain guard – Lower chain guard is mounted on bottom of roller frame, and upper chain guard is mounted above roller frame to totally enclose drive chain.
    Speed reducer – Heavy duty worm gear C-face mounted.

    Available Options
    - Side Mounted Drive: Motor/Reducer unit can be mounted to side of conveyor frame for lower elevations. Drive is higher than conveyor frame.
    - Conveyor Speed: 30 feet per minute is standard. Other constant, and variable, speeds are available.
    - Rollers Set Low: Rollers can be set low in conveyor frame to provide a guard rail effect.
    Unit of Measure

    Conveying Surface Width

    N/A 34 in

    Width between Rail

    N/A 37 in

    Overall Bed Width

    N/A 40 in

    Outside Radius R

    N/A 99 º

    Inside Radius IR

    N/A 62 º

    Number of Rollers

    N/A 28

    Weight

    N/A 903 lb

    Motor

    N/A 3/4 hp 230/460-3-60 TE motor

    Speed Constant

    N/A 30 fpm
    Capacity1 N/A 4000 lb
    • 1 Capacity distributed live load.