• Packing
  • Inspecting
  • Sorting
  • Assembly
  • Testing
  • Transporting


  • Bed – 12 gauge powder painted formed steel, 4" deep. Bed sections are 5 feet and 10 feet long, bolted together with spice plates and floor supports.
    Tail pulley – 4" diameter crowned with 1 3/16" diameter shaft.
    Drive pulley – 4" diameter and 8" diameter crowned and fully lagged 4" diameter pulley with 1 3/16" diameter shaft, 8" diameter pulley with 1 7/16" diameter shaft.
    Snub roller – 2" diameter for 4" diameter drive pulley, 2 1/2" diameter for 8" diameter drive pulley.
    Return roller – 1.9" diameter adjustable on 10' 0" centers.
    Floor supports – Adjustable 28 1/2" to 42 1/2" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
    Take-up – 6" long screws located at tail pulley to provide belt tension.
    Bearings – Sealed and pre-lubricated with cast iron housings.
    Speed reducer – C-face mounted heavy duty worm gear reducer.
    Capacity – Maximum load per lineal foot of conveyor - 75 lbs. Not to exceed Load capacity.
    Unit of Measure

    Bed Length

    N/A 10 ft

    Overall Length

    N/A 10 ft 10 in

    Diameter Drive Pulley

    N/A 4 in

    Belt Width

    N/A 24 in

    Bed Width

    N/A 28 in

    Weight

    N/A 422 lb

    Belt Material

    N/A black PVC 120 belt

    Standard Color

    N/A ACSI Green ACSI Gray ACSI White ACSI Dark Blue ACSI Tan ACSI Black

    Motor

    N/A 1/2 hp 230/460-3-60 TE motor

    Belt Speed Constant

    N/A 60 fpm

    Load Capacity at 1/2 hp

    N/A 435 lb

    Load Capacity at 3/4 hp

    N/A 650 lb
    Load Capacity at 1 hp1 N/A 810 lb
    • 1 1 hp max. for this model.