Packing

Inspecting

Sorting

Assembling

Testing

Transporting horizontally or on incline

Bed – Roller bed with 1.9" diameter galvanized steel rollers. Rollers spaced on 6" centers. Rollers mounted in 7" deep x 12 gauge powder painted formed steel channel frames. Frames bolted together with butt couplings and floor supports.
X-Bracing – Frame squaring device supplied on conveyors 40 feet and longer for every other bed section. X-bracing insures good product and belt tracking.
Drive pulley – 8" diameter crowned and fully lagged, 1 7/16" shaft.
Tail pulley – 4" diameter crowned supplied through 30" wide belts. 6" diameter crowned supplied for 36" and wider belts. 4" diameter pulley has 1 3/16" diameter shaft; 6" diameter pulley has 1 7/16" diameter shaft turned down on ends to 1 3/16" diameter.
Pop-out roller – 1.9" diameter roller, Iocated at drive pulley and tail pulley.
Snub roller – 2 1/2" diameter adjustable roller, Iocated directly behind drive pulley, 2" diameter located behind tail pulley.
Return rollers – 1.9" diameter adjustable on 10' 0" centers.
Take-up – Located at tail end, provides 12" of belt take-up.
Bearings – Sealed-prelubricated with cast iron housings.
Floor supports – Adjustable 31 1/2" to 45 1/2" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
Speed reducer – C-face mounted heavy duty worm gear reducer.
Capacity - 200 pounds per foot maximum. Not to exceed Load capacity.