• Packing
  • Inspecting
  • Sorting
  • Assembling
  • Testing
  • Transporting horizontally or on incline

  • Bed – Roller bed with 1.9" diameter galvanized steel rollers. Rollers spaced on 6" centers. Rollers mounted in 7" deep x 12 gauge powder painted formed steel channel frames. Frames bolted together with butt couplings and floor supports.
    X-Bracing – Frame squaring device supplied on conveyors 40 feet and longer for every other bed section. X-bracing insures good product and belt tracking.
    Drive pulley – 8" diameter crowned and fully lagged, 1 7/16" shaft.
    Tail pulley – 4" diameter crowned supplied through 30" wide belts. 6" diameter crowned supplied for 36" and wider belts. 4" diameter pulley has 1 3/16" diameter shaft; 6" diameter pulley has 1 7/16" diameter shaft turned down on ends to 1 3/16" diameter.
    Pop-out roller – 1.9" diameter roller, Iocated at drive pulley and tail pulley.
    Snub roller – 2 1/2" diameter adjustable roller, Iocated directly behind drive pulley, 2" diameter located behind tail pulley.
    Return rollers – 1.9" diameter adjustable on 10' 0" centers.
    Take-up – Located at tail end, provides 12" of belt take-up.
    Bearings – Sealed-prelubricated with cast iron housings.
    Floor supports – Adjustable 31 1/2" to 45 1/2" from floor to top of belt. One support supplied at each end of conveyor and at each bed joint.
    Speed reducer – C-face mounted heavy duty worm gear reducer.
    Capacity - 200 pounds per foot maximum. Not to exceed Load capacity.
    Unit of Measure

    Bed Length

    N/A 15 ft

    Overall Length

    N/A 18 ft

    Belt Width

    N/A 42 in

    Overall Width

    N/A 48 in

    Bed Width

    N/A 45 in


    N/A 870 lb

    Belt Material

    N/A black PVC 120 belt

    Standard Color

    N/A ACSI Green ACSI Gray ACSI White ACSI Dark Blue ACSI Tan ACSI Black


    N/A 1/2 hp 230/460-3-60 TE motor

    Belt Speed Constant

    N/A 60 fpm