• Wash down operations
  • Oily conditions
  • Positive drive – no belt slippage


  • Drive Chain – No. 40 roller chain on straight sections.
    Bed – 3 1/2" x 1 1/2" x 10 gauge powder painted formed steel channel on one side, 5" x 1 1/2" x 10 gauge formed steel channel on chain drive side. Sections are bolted together with butt couplings and floor supports.
    Tread rollers – 2" diameter x 12 gauge steel with #40 sprockets welded to roller tube, 7/16" hex shafts. Rollers spaced on 4", 6", 8" and 12" centers. Rollers are roller to roller driven.
    Chain guard – Chain guard is mounted to frame to totally enclose drive chain.
    Center drive – Mounted underneath conveyor, near center of section. Can be placed most anywhere in conveyor length. Specify.
    Floor supports – Adjustable 28" to 42" from floor to top of rollers. One support supplied at each end of conveyor and at each bed joint.
    Speed reducer – C-face mounted heavy duty worm gear reducer
    Capacity – Maximum load 150 Ibs. per foot; maximum unit load 500 pounds. Not to exceed Load capacity.
    Unit of Measure

    Conveyor Length Size A

    N/A 10 ft

    Conveying Surface Width

    N/A 16 in

    Width bethween Frames

    N/A 19 in

    Overall Width

    N/A 22 in
    Weight1 N/A 557 lb

    Motor

    N/A 1/2 hp 230/460-3-60 TE motor

    Roller Speed Constant

    N/A 60 fpm

    Load Capacity at 1/2 hp

    N/A 1625 lb

    Load Capacity at 3/4 hp

    N/A 2375 lb

    Load Capacity at 1 hp

    N/A 3025 lb

    Load Capacity at 1 1/2 hp

    N/A 3900 lb
    • 1 Weights based on 4" roller centers.