• Diverging or converging applications
  • Positive alignment of package
  • Right and Left Hand Units Available


  • Driving Belt - "B" section V-belt.
    Bed - Roller bed width between rails 15", 21", 27", 33" and 39". 7-1/2" x 1-1/2" x 12 gauge powder painted formed steel channel frame.
    Tread Rollers - 2-1/2" diameter tapered to 1-11/16" diameter plated and 1.9" diameter x 16 gauge plated steel tread rollers, 7/16" hex shaft.
    Pressure Sheaves - 3" diameter x 3/8" bore, adjustable to give required driving force.
    Take-Up - Screw take-up provided to insure proper V-belt tension. Mounted underneath conveyor.
    Tangent - 12" long, on one end of curved spur.
    Floor Supports - Adjustable 31-1/2" to 45-1/2" from floor to top of rollers.
    End Drive - Mounted below bed section.
    Bearings - Sealed prelubricated with cast iron housings.
    Speed Reducer - C-Face mounted heavy duty worm gear reducer.
    Motor - 1/2 HP 230/460-3-60 TE motor.
    Belt Speed - 60 FPM constant.
    Capacity - 540 Ibs. total distributed live load.
    Unit of Measure

    Type

    N/A Curve Spur

    Overall Width

    N/A 42 in

    Width bethween Frames

    N/A 39 in

    Radius

    N/A 48 in

    A at 45º

    N/A 82 in

    A at 30º

    N/A 93 3/8 in

    B at 45º

    N/A 90 5/8 in

    B at 30º

    N/A 133 3/8 in

    Motor

    N/A 1/2 hp 230/460-3-60 TE motor

    Belt Speed

    N/A 60 fpm

    Capacity

    N/A 540 lb

    Weight at 45º

    N/A 432 lb

    Weight at 30º

    N/A 490 lb